ICM Controls ICM870-9A Soft Start with built-in start capacitor in sealed IP65 Enclosure(Current output: 9A Nominal)

The ICM870 Soft Start is intended for RV, marine, residential and commercial applications. The ICM870 integrates compressor or motor in-rush current over startup time, thus reducing peak current demand on a power supply source by up to 70%.

The ICM870 will monitor system health including voltage, current, compressor startup and integrity. Utilizing a built-in self learning algorithm the ICM870 soft start delivers peak in-rush current per application.

Upon a fault condition, the ICM870 will halt operation and initiate a 3 minute anti-short cycle routine while providing diagnostic fault information by means of an LED indicator.

• Reduces in-rush current by up to 70%
• Over-current protection 
• Over/under voltage monitoring 
• Built-in start capacitor 
• Built-in self-learning algorithm 
• LED fault indicators 
• Ultrasonic sealed tamper-proof enclosure
• Installation hardware is included

WEIGHT/DIMENSIONS:

7.63” x 3.19” x 2.13”

SPECIFICATIONS :-

Semi-Conductor Soft-Start Motor Controller, Form 2, Bypassed Controller

• SCCR: 5kA   • Ue = 240 VAC

• Ui = 240 VAC   • Uimp = 4kv

• FCC Class B   • Pollution degree 3   • UL File E340301

• UL 60947-4-2 and IEC 60947-4-2

Input:

• (L1, L2) – 100-240 VAC 50/60Hz

• Over voltage limits: 115 VAC nominal = 140 VAC, 240 VAC nominal = 250 VAC 

• Under voltage limits: 115 VAC nominal = 95 VAC, 240 VAC nominal =195 VAC

Outputs:

• Compressor

• Solid state/relay

• Current: Max. nominal = 9 FLA for ICM870-9A,
16 FLA for ICM870-16A

• Over current limits: ICM870-9A = 11.25A,
ICM870-16A = 20A

Environmental:

• Ambient temperature: 40°C @ 16 FLA, 8 h duty 50°C @ 16 FLA, Temporary duty F = 30% (3 mins ON and 7 mins OFF), S = 6 (6 cycles per hour)

• Storage temperature: -40°F to 149°F (-40°C to 65°C)

• Humidity: 0-95% non-condensing

• Enclosure: IP65

• Dimensions: ICM870-9A/16A (7.60” x 3.20” x 2.10”)

• Screw Hole Center Points: 7.36” x 2.90”